Our Services

Powder Coating

Our three-decades of operations in South Australia has cemented our status as a reputable household name in the powder coating industry. We provide a wide range of powder coating applications that are tailored to your specific needs, with all available in a range of colours so you can achieve a consistent style. For metal and aluminium coating we use 2 highly durable products; standard polyester and Duralloy 272. Our polyester coating can be used to coat almost all metal items, including garden furniture, lighting, automotive wheels, and aluminium windows & doors. Duralloy 272 is a low maintenance film coating that has been specifically designed to withstand the extremes of the Australian climate, with this powder generally used over aluminium, steel, zinc-coated metals and castings. If you are ever unsure of which powder will best suit your specific application, our team is here to help!

Prior to coating, we prepare and pre-treat the surface in order to remove dirt, oil and contaminants to ensure there is adhesion between the powder and base metal. We than place the objects into a chromate tank for chromate conversion as per the requirements outlined by Australian standards for aluminium. Once the surfaces are sufficiently cleaned and treated, we apply the powder coating using an electrostatic gun to achieve an even finish. Our range of colours and finishes are designed to suit both domestic and commercial applications. Finally, the items are heat cured to ensure the powder is bonded to the metal – and just like that, your aged and weathered items are completely brought back to life!

powder-coating-services

Sand Blasting

Our Garnet Blasting service is EPA compliant, with the benefits of less dust and no safety hazards at the equivalent production rate of silica sand. Garnet is a high quality, general purpose blasting abrasive. The abrasive substance (garnet) is propelled at a high pressure against the metal surface. This process works to remove rust, corrosion, unwanted paint and oils from the substrate, leaving behind a clean profile on which the powder coating can adhere to without any further sanding or preparation required.

Our process involves blasting and preparing the surface to remove any existing coatings and contaminants that will compromise the quality of adhesion. Next, we prime the surface to provide an ideal base to act as a corrosion inhibitor, before curing this in the oven for approximately 1 hour. We then powder coat the surface in a colour of your choice, before again curing for quality maintenance. Southern Powder Coaters can blast products of varying capacities, including:

  • Agricultural equipment
  • Automotive parts
  • Bicycles
  • Furniture
  • Motorbikes
  • Structural components i.e. gates, handrails, doors
  • & more!

Restorations

Any form of bare metal can be brought back to life with the help of a powder coating application. No job is too big or small, with our unrivalled knowledge of the powder coating market allowing us to provide a service that is truly unique for our fellow South Australians. Restoring your existing items is generally a much cheaper alternative than complete replacement, with the item restored to a state that is potentially more durable than it was when it was brand new.

We use 2 products which have been proven to stand the test of time. Our standard polyester coating can be used to treat almost any metal surface, including automotive wheels, aluminium windows & doors, lighting and garden furniture. This substance is incredible versatile, offering a durable powder coating solution for a range of objects. Secondly, our Duralloy 272 powder has been specifically designed to withstand the the extreme Australian climate, and is generally applied over aluminium, steel, zinc-coated metals and castings. This low maintenance coating also comes with the added benefit of an anti-graffiti film coating, so in the event it is vandalised, if can be restored to it’s originally coated state.

Powder Coating

Powder Coating

Our three-decades of operations in South Australia has cemented our status as a reputable household name in the powder coating industry. We provide a wide range of powder coating applications that are tailored to your specific needs, with all available in a range of colours so you can achieve a consistent style. For metal and aluminium coating we use 2 highly durable products; standard polyester and Duralloy 272. Our polyester coating can be used to coat almost all metal items, including garden furniture, lighting, automotive wheels, and aluminium windows & doors. Duralloy 272 is a low maintenance film coating that has been specifically designed to withstand the extremes of the Australian climate, with this powder generally used over aluminium, steel, zinc-coated metals and castings. If you are ever unsure of which powder will best suit your specific application, our team is here to help!

Prior to coating, we prepare and pre-treat the surface in order to remove dirt, oil and contaminants to ensure there is adhesion between the powder and base metal. We than place the objects into a chromate tank for chromate conversion as per the requirements outlined by Australian standards for aluminium. Once the surfaces are sufficiently cleaned and treated, we apply the powder coating using an electrostatic gun to achieve an even finish. Our range of colours and finishes are designed to suit both domestic and commercial applications. Finally, the items are heat cured to ensure the powder is bonded to the metal – and just like that, your aged and weathered items are completely brought back to life!

Sand Blasting
powder-coating-services

Sand Blasting

Our Garnet Blasting service is EPA compliant, with the benefits of less dust and no safety hazards at the equivalent production rate of silica sand. Garnet is a high quality, general purpose blasting abrasive. The abrasive substance (garnet) is propelled at a high pressure against the metal surface. This process works to remove rust, corrosion, unwanted paint and oils from the substrate, leaving behind a clean profile on which the powder coating can adhere to without any further sanding or preparation required.

Our process involves blasting and preparing the surface to remove any existing coatings and contaminants that will compromise the quality of adhesion. Next, we prime the surface to provide an ideal base to act as a corrosion inhibitor, before curing this in the oven for approximately 1 hour. We then powder coat the surface in a colour of your choice, before again curing for quality maintenance. Southern Powder Coaters can blast products of varying capacities, including:

  • Agricultural equipment
  • Automotive parts
  • Bicycles
  • Furniture
  • Motorbikes
  • Structural components i.e. gates, handrails, doors
  • & more!
Restorations

Restorations

Any form of bare metal can be brought back to life with the help of a powder coating application. No job is too big or small, with our unrivalled knowledge of the powder coating market allowing us to provide a service that is truly unique for our fellow South Australians. Restoring your existing items is generally a much cheaper alternative than complete replacement, with the item restored to a state that is potentially more durable than it was when it was brand new.

We use 2 products which have been proven to stand the test of time. Our standard polyester coating can be used to treat almost any metal surface, including automotive wheels, aluminium windows & doors, lighting and garden furniture. This substance is incredible versatile, offering a durable powder coating solution for a range of objects. Secondly, our Duralloy 272 powder has been specifically designed to withstand the the extreme Australian climate, and is generally applied over aluminium, steel, zinc-coated metals and castings. This low maintenance coating also comes with the added benefit of an anti-graffiti film coating, so in the event it is vandalised, if can be restored to it’s originally coated state.

Get in touch to find out how we can help you. Call today

Phone: (08) 8322 5200

About Us

As a proudly South Australian owned & operated company, Southern Powder Coaters boast an impressive three-decade long experience in the local powder coating market. In this time, we have constantly worked to improve the efficiency and quality of our service, supported by our superior up-to-date technologies, while offering the highest possible level of customer experience. We only utilise the best available coating powders to ensure we are compliant with Australian standards; however, we take this one step further by voluntarily sending samples to the Dulux laboratories for testing, with a report generated after 2 months of stringent assessment to guarantee the quality and reliability of our products. So, when we say we are the best powder coater in South Australia, you can trust what we have the process to prove it.

Read more

Powder Coating Services in Adelaide

If you’re looking for high quality powder coating services in Adelaide that will protect your products, then Southern Powders Coaters is the best option for you. Southern Powders Coaters is the most reliable powder coating team in South Australia. We specialise in aluminium powder coating using durable polyesters that are ideal for architectural residential fittings such as doors, windows, screens, balustrades and fences. We have a variety of coating options available, some of which have been formulated specifically for residential developments equivalent to BCA class 1 and 10 buildings that are up to 3 floors from the ground. We also provide a wide variety of colours; giving you the freedom to choose according to your lifestyle needs and preferences. We are located at 41 Lindsay Road Lonsdale SA 5160. You can contact us about our powder coating services in Adelaide via our office phone number (08) 8322 5200 for any enquiries.

Powder Coating Services that Cares for Your Investments

Our powder coating services in Adelaide are conducted using modern techniques to warrant superior quality, and long-lasting protection. We proudly provide powder coating services to a wide range of companies and businesses in South Australia. Within a single day, we’re capable of powder coating security doors, security screens, window extrusions, all types of fencing and small/large components for the mining and electrical industries. The restoration market is growing all the time, car and bike parts, outdoor furniture, or any of your pre-loved items can be fully restored! We can blast, prime and top coat any steel or aluminium, even cast iron and cast aluminium. We also provide a wide variety of colour options to suit your needs and preferences. Our powder coating services in Adelaide are the best in the business, so be sure to call for a quote today!

The Best Powder Coating Services in Adelaide

Southern Powder Coaters are committed to providing the best powder coating services in Adelaide. We enforce Green Working Procedures which includes the use of solar power and collecting rainwater to be used in our processing. We provide superior quality powder coating services that you can rely on. We only use the best coating powders available, to ensure we meet Australian Standards 3715:2002 and 1580:2004. We regularly send samples to the Dulux laboratories for testing. It takes 2 months to complete this testing and report, thus making our powder coating service the most reliable on the market. We are very proud to offer the best quality service in all of South Australia. Upon application, we offer free pickup and delivery, making Southern Powder Coaters the most convenient powder coating service in Adelaide.

Have your Investment Protected Today? Let us provide your powder coating requirements by calling our office on
(08) 8322 5200.

Get in touch to find out how we can help you. Call today

Phone: (08) 8322 5200

(08) 8322 5200